Gold Member Since 2016
Audited Supplier
BEIJING AIGENG AGRI-FACILITIES CO., LTD.

Rack and Pinion, Shading System, Greenhouse Curtain Drive manufacturer / supplier in China, offering Greenhouse Shade Net Curtain Drive Motor and Components, Manual Roll up Winder for Greenhouse, Wire Roller and so on.

(/ )

Supplier Homepage Product greenhouse shade rack pinion Greenhouse Shade Net Curtain Drive Motor and Components

Greenhouse Shade Net Curtain Drive Motor and Components

FOB Price: US $3-5 / Square Meter
Min. Order: 1,000 Square Meters
Min. Order FOB Price
1,000 Square Meters US $3-5/ Square Meter
Get Latest Price
Production Capacity: 1000
Transport Package: Carton
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Type: Type a System
  • Function: Greenhouse Shading
  • Shade Model: out Side Shade and Inside Shade
  • Trademark: SLC
  • Origin: China
  • Name: Rack and Pinion Shade System
  • Shade Rate: From 30% to 99%
  • Application: for Shading in Vegetable and Flower Greenhouse
  • Specification: TYPE A
Product Description
Racks & Pinions Shade System
 
ItemNameSpecificationApplication
1Shading MotorGW10,GW30,GW40,GW80torque 100-800Nm;rotate speed 2.6-5.2rpm
2shaft joint1",5/4"1",5/4"driving shaft
3PinionStyle A,transmission ratio 1:1.81",5/4" driving shaft
4RackL=3160,3965 mmGreenhouse section 3-5m
5Welding joint1",5/4"1",5/4" driving shaft
6Coupling connector for rackФ27,Ф32Ф27,Ф32 handspike
6aclamp6×26mm-
6bboltM8×35,M8×40Length of the bolt depends on the handspike diameter
7Pinion connecting gasketФ43×4/M8-
7aboltM8-
8driving shaft1",5/4"-
9handspikeФ27×1.5mm,Ф32×1.5mm-
10Handspike guide connectorФ27,Ф32Ф27,Ф32 handspike
10aT shape boltM6×75-
11Pipe roller--
11aPipe roller clamp-Size depends on the structure
11bBoltM6-
12Drive edge aluminum profile4m/pc-
13   
Spring WireФ1.5mm,L=2m 
14Shade Net--
 
The installation of the shade system
1 Holding wire
After the shade net system structure is installed, the next step is to  install the holding wire. The holding wire is installed between the 2 curtain beams. The distance between each 2 holding wires is 500mm except that the 2 wires on both sides of the greenhouse, which has the space of 100mm to the structure. The holding wire goes along the span (or the gutter) direction from one side of the beam lower part to reach the other beam lower part and goes around the beam for one turn to come back from the upper part of the beam to the starting position and to be fixed there.

Greenhouse Shade Net Curtain Drive Motor and Components
Greenhouse Shade Net Curtain Drive Motor and Components



 
Send your message to this supplier
Avatar
Ms. amy
*From:
To: Ms. amy
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now